Exambible is your source for the 642-432 exam. With our 642-432 Exam Resources, you can be rest assured that you will be fully prepared to take on your 642-432 Exam. Our Exams are written and formatted by Top senior IT Professionals working in today s prospering companies and data centers. 642-432 is a challenging exam, with our 642-432 study guide, you can feel safe with our question and answer explanations that will help you in obtaining your successful completion of your 642-432 exam.

Exambible also provide free 642-432 Demo, examinees can download and use before buying 642-432 Q&As, then decide if they need to purchase.

Other Cisco Exams

1 You are meeting with a customer that has deployed IP telephony at
their headquarters location. They would like to roll out IP telephony
to their regional office as well. They are now using the G.711 codec at
headquarters. They want to be able to maximize the number of calls
carried without impacting voice quality or forcing a WAN upgrade. Which
codec would be appropriate for their WAN?
A. G.726
B. G.723.1
C. G.711
D. G.729B
Answer: D

2 A dial plan uses six-digit numbers where the first two digits are an
access code and the last four digits are an extension. Access codes
must begin with 7 or 8 and the second digit cannot be 0, 1, 5, or 9.
Which two route patterns will support this dial-plan requirement?
(Choose two.)
A. [78][2-4,6-8].XXXX
B. [7-8][^0159].XXXX
C. [^0-6,9][2-4,6-8].XXXX
D. [^0-69][2-4678].XXXX
E. [^78][^234678].XXXX
Answer: BD

3 Examine the example output.
Choose the command that will restore communication with gatekeeper functionality to this device.
A. h323-gateway voip h323-id GK1
B. gateway
C. h323-gateway voip bind srcaddr 172.16.2.2
D. h323-gateway voip GW1-zone2.abc.com abc.com ipaddr 172.16.2.1
Answer: B

4 Examine the following PBX system parameters:
The calling side seizes the line by going off-hook on its E-lead and sends information as DTMF digits.
The voice path is 4-wires, and the voice enabled router is in another building from the PBX.
Select the correct set of commands to allow communication between a voice enabled router and a PBX.
A. voice port 1/0/0
signal immediate-start
operation 4-wire
type 2
B. voice-port 1/0/0
signal delay-dial
operation 4-wire
type 1
C. voice port 1/0/0
signal wink-start
operation 4-wire
type 3
D. voice port 1/0/0
signal immediate-start
operation 4-wire
type 4
Answer: A

5 In a VoIP environment when speech samples are framed every 20 ms, a
payload of 20 bytes is generated. Assuming a total packet length of 60
bytes, what is the length of the packet header if cRTP is deployed
without redundancy checks?
A. 1 byte
B. 2 bytes
C. 3 bytes
D. 4 bytes
E. 20 bytes
F. 40 bytes
Answer: B

6 You have been forwarded some questions by a prospective VoIP
customer who would like to know the Cisco default sample size for the
G.729 codec. What is it?
A. 40 ms
B. 30 ms
C. 20 ms
D. 10 ms
Answer: C

7 Which command parameter specifies that the router should not attempt
to initiate a trunk connection but should wait for an incoming call
before establishing the trunk?
A. codec clear-channel
B. connection-trunk 404555…. answer-mode
C. voice-port 1/0:1
D. ds0-group timeslots 1-23 type ext-sig
Answer: B

8 In T1 CAS, where are the signaling states and control features carried for Super Frame robbed-bit signaling?
A. 6th and 12th frame
B. 6th, 12th, 18th, and 24th frame
C. the first and seventeenth time slot
D. the first and sixteenth time slot
Answer: A

9 Examine the output.
Your customer has sent you their MGCP gateway configuration. They are
unable to get the gateway to communicate with the call agent. What
command needs to be inserted to resolve the problem?
A. ccm-manager mgcp 172.16.1.1
B. mgcp call-agent 172.16.1.1
C. application MGCPAPP 172.16.1.1
D. mgcp 5036 172.16.1.1
Answer: B