CCNP certification (Cisco Certified Network Professional) indicates certified staff has a wealth of networking knowledge. Get CCNP certified professionals can provide with 100 to more than 500 nodes in a large enterprise network installation, configuration and operation of LAN, WAN and dial-up access business.
Test subjects in 2006 fully updated as follows:
642-901 BSCI ,642-812 BCMSN ,642-825 ISCW ,642-845 ONT
Currently, a new version of CCNP is described by: CCNP certification means that the network people have a right from 100 nodes to more than 500 nodes in a converged LAN and WAN installation, configuration and troubleshooting capabilities. CCNP certification to obtain the network who have a wealth of knowledge and skills to manage constitute the core of the network routers and switches, as well as voice, wireless, and security into the network edge applications.
CCNP exam since its inception in 1998, after several changes, at present, there are two ways to obtain the latest CCNP: First, 901 +812 +825 +845, another one is 892 +825 +845.
2006 latest version of the CCNP examination subjects:
Test Number
642-901 BSCI (Building Scalable Cisco InternetWorks)
642-812 BCMSN (Building Converged Cisco Multilayer Switching Networks)
642-825 ISCW (Implementing Secure Converged Wide Area Networks)
642-845 ONT (Optimizing Converged Cisco Networks)
Compared with the original, the biggest change is the addition of wireless, voice, security and CCSP, CCIE in the part of the technology, removing the obsolete technically kind of knowledge such as the asynchronous dial-up point, the study covers a much wider range technology more practical.
CCNP certification is valid for three years.
The officer is about to expire before the expiry of the certificate to participate in the current version of the re-certification exam, at present, re-certification examination subjects for the 642-892.
2006 new CCNP curriculum improvements:
First class, Course Title: Building Scalable Cisco Networks. Little change in the original based on the increased demand for IPv6, CCIE Routing, IPv6 closer examination standards.
The second course, Course Title: Building Cisco Multilayer Switched Networks. Little change on the wireless client configuration with the new requirements, which is Cisco Certified keep the current practice of new technology hot spots to ensure that students have learned the usefulness of network technology.
The third course, Course Title: achieving secure remote access. This gate changes the most, out of the Modem dial, ISDN and other outdated technologies; focused ADSL broadband technology, VPN technology has been enhanced by adding a GRE VPN; striking is the inclusion of MPLS technology, network security defense, and IOS firewall, The most powerful place is the inclusion of IPS intrusion detection technology.
The fourth course, Course Title: Optimization of the Cisco network infrastructure. Changes in relatively large, joined the VOIP voice technology, congestion management, QOS quality of service management technology from the original door was moved to the third course in the fourth.
To sum up, the new CCNP certification is still very attractive and worthy of careful study in which we go to new technology in order to in practical work to create greater value.
Appendix: January 1, 2007 with effect from the latest NP exam:
1 ,642-901 BSCI v3.0 Building Scalable Cisco Internet
1. To achieve the operation of EIGRP:
To explain the function and operation of EIGRP Principles
Configure EIGRP routing and verify EIGRP Stub Routing and Communication
Validation and Troubleshooting
2. To achieve the multi-area OSPF operations:
To explain the function and operation of the principle of OSPF
Configure OSPF routing, as well as the multi-zone special area and communication verification
Validation and Troubleshooting
3. Describe the integrated IS-IS routing protocol
Description Integrated Intermediate System to Intermediate System routing features and benefits of
Configure and verify basic IS-IS routing
4. To achieve Cisco’s IOS routing features:
Describe the configuration and verify multiple Interior Gateway Routing Protocol re-distribution between
Describe and verify route filtering
Describe and configure the DHCP service
5. To achieve enterprise-class Internet service provider’s BGP connection
Describe the function and operation of the principle of BGP
Configure and verify BGP autonomous system in the non-delivery run
Verify BGP configuration and validation of communication
Configure BGP path selection
6. To achieve multicast routing forwarding:
Describe the basic principles of IP Multicast
Description IP multicast address of the third layer to the second layer of mapping
Description IGMP
Describe the configuration and verify multicast routing (Protocol Independent Multicast Sparse-Dense Mode)
7. To achieve IPV6 Routing:
Describe the IPv6 addressing scheme
Describe the operation of IPv6 and IPv4 synergy
Describe the configuration and verify OSPF routing for IPv6
2, 642-812 BCMSN v3.0 Building Cisco multilayer switched networks
1. Virtual LAN:
Explain the VLAN feature in the hierarchical network
Configure VLAN
To explain and configure the VLAN trunk (IEEE802.1Q/ISL)
To explain and configure the VTP
Verification and troubleshooting VLAN configuration
2. Management spanning tree protocol running in the hierarchical network:
To explain the operation principle of Spanning Tree Protocol (RSTP / PVRST / MSTP)
Configure RSTP / PVRSTP / MSTP
Describe and configure STP security mechanisms (BPDU guard / Filtering / ROOT Guard)
Configure and verify UDLD and Loop Guard
Verification and debugging the operation of Spanning Tree Protocol
Configure and verify link aggregation using PAgP, and LACP
3. To achieve inter-VLAN routing:
To explain and configure Inter-VLAN Routing
To explain and configure the CEF
Verification and troubleshooting inter-VLAN routing
4. To achieve the gateway redundancy technologies:
Gateway redundancy protocols to explain the function and operation (HSRP / VRRP / GLBP)
Configure HSRP / VRRP / GLBP
Verification of high reliability configuration
5. Describe and configure wireless client access:
Describe the operation of wireless LAN technology, and composition of the unit
Describe the wireless client devices / Network Alliance / mobile platform features
Configure the wireless network client
6. Describe and configure the exchange of network security features:
Describe the general second-layer network attacks (Mac Flooding / DHCP Spoofing / Rogue
Devices …)
To explain and configure the port security / 802.1x/VACL/Private VLANS / DHCP
Snooping / DAI
Verify Switch Security Configuration
7. Configure Speech Technology:
Describe the voice characteristics of the network in the park
Describe the voice VLAN and trust functions of the border
Configure and verify basic IP Phone support
3, 642-825 ISCW v1.0 to achieve the security of the WAN aggregation
1. To achieve basic household telecommunications access services:
Description cable technology (HFC)
Description XDSL Technology
Configure ADSL (PPPoE / PPPoA)
Authentication Configuration
2. To achieve frame mode multi-protocol label switching:
Description Frame-Mode Multi-protocol Label Switching the composition and operation of
Set up and verify Frame-Mode Multi-protocol Label Switching
3. To achieve site-to-site IPSEC VPN:
Describe the IPSec VPN / GRE tunnels composition and operation
Use SDM to configure the software site-to-site IPSec vpn / GRE Tunnel
Verify IPSec / GRE tunnel configuration
Describe the configuration and verify VPN backup port
Describe and configure the Cisco-based VPN solution for a simple SDM
4. Describe the network security policy:
Describe and mitigate common network attacks (scan / access / denial of service attack)
Describe and alleviate the worms, viruses and Trojan horse attacks
Describe and mitigate application-layer attacks
5. To achieve Cisco equipment, hardware-based security:
Describe the configuration and verify automatic safety / locking technology to achieve a step
Describe the configuration and validation services to Cisco routers AAA
Describe and configure access control lists to ease the use of threats and attacks
Describe and configure IOS secure management features (SSH / SNMP / SYSLOG, NTP …)
6. To achieve Cisco IOS Firewall:
Description based on the Cisco IOS Firewall features and operation (stateful firewall and CBAC)
Use SDM to configure Cisco IOS Firewall Software
Verify Cisco IOS Firewall Configuration
7. Describe and configure Cisco’s intrusion protection system / intrusion detection system
Description intrusion protection systems and intrusion detection system operation and function of
Use SDM to configure Cisco IOS software, intrusion protection system
4, 642-845 ONT v1.0 optimized Cisco’s network aggregation
1. Describe the implementation of Cisco VOIP:
Describe the function and operation of VOIP networks
Enterprise networks to describe and identify basic voice components (Gatekeeper / Gateways)
2. Describe the QOS considerations:
Explain the aggregate demand for the network QOS
QOS implementation strategy described in
3. Describing services architecture based on the difference between the QOS implementation:
Describe the classification and labeling (COS / TOS / IP Precedence / DSCP …)
Describe the Web-based Application Recognition NBAR feature classification
Explain the congestion management and congestion avoidance mechanism (FIFO / PQ / WRR / WRED …)
Describe the traffic policing and traffic shaping
Description Control Plane Strategy
An effective mechanism to describe the wide area network links (Payload / Header Compression, cross-processing)
Describe and configure the QOS pre-classification
4. Automated QOS:
To explain the function and operation of automated QOS
Describe the SDM based on the QOS wizard
Configuration verification and debugging automation to achieve QOS
5. Wireless LAN security and management:
Describe and configure the Cisco client and access point on the wireless security
Describe the basic wireless management
Configure and verify wireless management
Describe and configure wireless LAN QOS
642-892 Routing Switch combo test (replacing the 642-891 combo examinations)
The new ID cards which ,642-892 exam was opened in November 2006; The large number of candidates to arrange study and examination dates.
CCNP test fee
892 of the original 187.5 U.S. dollars are now 300 U.S. dollars;
845 of the original 125 U.S. dollars, are now 150 U.S. dollars;
825 of the original 125 U.S. dollars, is now 150 U.S. dollars.
Prices of the 2-in-one post-CCNP Exam 642-892 price is equivalent to 901 +812 prices, test 3 and test 4-door price, without any concession of.
Cisco Career Certification Tracking System Technology
Candidates sit CCNP, you need to login fill in personal information.
Cisco’s vocational and technical certification tracking system is a Certified Professional information resources for the security database, which provides worldwide technology, Cisco certification exams of many experts in the history and certification records.
The system tracks all engineers and experts, examinations and certification, including:
Personal Contact Information
Examination History (participated in the examination, date and score)
Certification process (certification and completed)
Re-certification Date
Has signed agreements (or any agreement be signed)
Tracking system records the availability of engineers and experts, the basis for certification marks.
Cisco in the tracking system, using personal contact to award the certificate of notification and inform the certification program related information, since the candidates attended the first exam within 10 days after, the system of income and thereafter has been kept in the candidate’s relevant information, the examination After the candidates will receive the report card will be ID number and exam number, candidates may test via Cisco authorized vendor Prometric or VUE ordered the two transcripts.
From Cisco Systems (China) certification departments found, in order to conform to CCIEv4.0, CCNP would be the end of 2009 a major revision, change the time around Christmas 2009.
The original Subject:
CCNP Prerequisites
Valid CCNA certification
CCNP Exams & Recommended Training
Required Exam (s) Recommended Training
642-901 BSCI Building Scalable Cisco Internetworks (BSCI)
642-812 BCMSN Building Cisco Multilayer Switched Networks (BCMSN)
642-825 ISCW Implementing Secure Converged Wide Area Networks (ISCW)
642-845 ONT Optimizing Converged Cisco Networks (ONT)
OR
Required Exam (s) Recommended Training
642-892 Composite Building Scalable Cisco Internetworks (BSCI)
Building Cisco Multilayer Switched Networks (BCMSN)
642-825 ISCW Implementing Secure Converged Wide Area Networks (ISCW)
642-845 ONT Optimizing Converged Cisco Networks (ONT)
CCNP exam subjects and examination of this revision, code-named a major adjustment; will be fully keep pace with the trend of a new version of CCIE V4.0:
1, advanced routing Route v1.0 Exam Number :642-902 (with not many before the change might ISCW part of this route notes)
2, multi-layer switching Switch v1.0 Exam Number :642-813 (basically no change in how much should be put back into QOS)
3, security, troubleshooting TShoot v1.0 Exam Number :642-832 (which is the door comply CCIE v4.0 examination standards of the 2 hours debugging

Related posts

• How clever to determine viruses and Trojan horsesfrom the process information (1) (0)
• Cisco Prüfung (0)
• cisco certification verification (0)
• Cisco certification exams four test center Difficult Problems (0)
• Cisco certification de vérification (0)